Header image  

850-877-3474

Sales Service Installation

Since 1980

 
  BACK  

 

  • RF Link AWM-5860    Wireless 5.8ghz 8 Channel RF Mini Module

Perfect to incorporate in covert surveillance applications

FREE SHIPPING

 

 

 

  • Mini transmitter module design (32 mm x 29 mm).
  • 5.8 GHz band FM-FM modulation/demodulation.
  • Compatible with both NTSC and PAL video formats.
  • FCC, CE, and EN 300 440 certified.
  • Perfect for OEM/ODM covert surveillance applications.
  • Transmitter module in mini size (32 mm x 29 mm).
  • 5.8 GHz frequency has strong immunity of interference from 900 MHz or 2.4GHz ISM applications such as Cordless phone, 802.11b/g Wireless LAN, Bluetooth, Microwave oven, etc.
  • 8 selectable channels of 5733 ~ 5866 MHz.
  • +13 dBm output power (maximum).
  • Mini transmitter module equipped with helical antenna.
  • Receiver module equipped with directional antenna minimizes multi-path and interference.
  • Transmission range up to 300 feet range with clear line-of-sight.
  • Compatible with both NTSC and PAL video formats.
  • High S/N video output and stereo audio output.
  • Low power consumption.
  • 5.8 GHz band FM-FM modulation/demodulation.
  • Simple digital pins setting 8 fixed channels to eliminate external micro-controller.
  • RF transmission is capable in penetrating thru. walls.
  • Adjacent channel interference is minimized.
  • All 8 RF channels can be used simultaneously.
  • Perfect to incorporate in covert surveillance applications.
  • Ideal solution in OEM/ODM specialty market.
  • FCC & CE certified.
  • EN 300 440 certified.

 

 

Q: What types of antenna connectors are used on AWM-5860 TX and RX board?
A:
The connector used on the antenna of AWM-5860-TX is IPEX, as for RX board, it is SMA female, same as AWM-5880-RX.


Q: Is there another industry name for one similar to IPEX?
A: There are two types of connector that are similar to IPEX connector. They are MMCX connector and SMC connector, whose size is similar to IPEX's. However, if the performance is taken into consideration, it is recommended to remove the IPEX connector and add one piece of antenna cable onto AWM-5860 board and attach a SMA connector to the antenna cable.


Q: In terms of output power, what is mW of AWM-5860 8-channel mini transmitter module?
A: The output power of AWM-5860-TX is 25mW without counting the antenna gain.

Q: For the power supply input of AWM-5860, is it center positive or center negative?
A: Center positive.

Q: What type of cable should I use to connect APW-1000 between AWM-5860 transmitter and its antenna?
A: A cable that one end comes with IPEX and the other end with SMA connector is needed to connect between AWM-5860 transmitter and its antenna.